CertSafari

    Free Microsoft Dynamics 365 Contact Center AI Engineer (AB-250) - December 18 onwards Sample Questions

    35 free sample questions from our bank of 351+, covering every exam domain, with answers and detailed explanations. Updated November 2026.

    1: Deploy Dynamics 365 Contact Center

    1.1: Implement Dynamics 365 Contact Center

    1.In a custom CRM connector setup, an incremental sync copies data through automated triggers, whereas an initial sync copies data through manual triggers.

    1. A.True
    2. B.False
    Show answer & explanation

    Correct answer: A — True

    • A. Initial sync uses manual triggers and incremental sync uses automated triggers firing on create, update and delete events.
    • B. Reversing the two trigger types is the common error; the described pairing is the documented one.

    1.3: Manage users

    2.A Contact Center admin built a custom security role from scratch for seasonal chat representatives and mapped it to the Agent persona in role persona mapping. Persona features still do not treat holders of the role as representatives. Which privilege must the custom role include so the persona mapping works?

    1. A.prvAdmin
    2. B.prvAgent
    3. C.prvSupervisor
    4. D.prvReadQueue
    Show answer & explanation

    Correct answer: B — prvAgent

    • A. The prvAdmin privilege marks a role as the administrator archetype, so it would make seasonal representatives behave like admins rather than agents.
    • B. The prvAgent privilege is what identifies a custom role as the representative archetype, so it must be assigned for the Agent persona mapping to take effect.
    • C. The prvSupervisor privilege marks the supervisor archetype and would expose monitoring and reassignment tasks that seasonal representatives should not have.
    • D. A table-level read privilege on queues grants data access only and does not mark the role as any persona archetype, so persona mapping would still fail.

    1.3: Manage users

    3.In an environment with only Dynamics 365 Contact Center, role persona mapping defaults to Omnichannel Administrator for the admin persona, Omnichannel supervisor for supervisor, and Omnichannel agent for agent.

    1. A.True
    2. B.False
    Show answer & explanation

    Correct answer: A — True

    • A. True. These are the default Contact Center mappings; CSR Manager and Customer Service Representative are added when Customer Service Enterprise is also enabled.
    • B. False would be wrong because the three primary Omnichannel roles are mapped to the three personas out of the box.

    1.1: Implement Dynamics 365 Contact Center

    4.A custom CRM supports outbound webhooks. An administrator wants create, update and delete events on accounts and contacts to push changes into Dataverse incrementally. Where does the administrator obtain the endpoint to register as the webhook target in the CRM?

    1. A.From the Dataverse web API, build the EntitySet URL of each table and enter it in the CRM's webhook settings, one URL per create, update and delete event.
    2. B.From Power Apps, create a custom connector for Dataverse and copy its host URL into the CRM's webhook settings, one URL per create, update and delete event.
    3. C.From the Azure portal, create an Event Grid topic and copy its endpoint into the CRM's webhook settings, one URL per create, update and delete event.
    4. D.From Power Automate, open the flow's manual trigger and copy its HTTP URL into the CRM's webhook settings, one URL per create, update and delete flow.
    Show answer & explanation

    Correct answer: D — From Power Automate, open the flow's manual trigger and copy its HTTP URL into the CRM's webhook settings, one URL per create, update and delete flow.

    • A. The Dataverse web API is a data endpoint that expects requests in its own format with Microsoft Entra authentication. A CRM webhook posts its own payload and carries no such token, so nothing would translate it into incremental sync logic in Dataverse.
    • B. A custom connector only describes how flows and apps call the Dataverse API, and its host URL is the API host. That address does not receive webhook calls from the CRM or run any logic when a record changes.
    • C. An Event Grid topic endpoint accepts events, but nothing connects it to Dataverse. The topic would need extra processing to turn CRM changes into table writes, and the flows already supply the receiving endpoints.
    • D. Each flow exposes an HTTP URL on its manual trigger, and that URL is registered as the webhook target in the CRM. A separate flow and URL are needed for each create, update and delete operation, so the process is repeated for each one.

    1.1: Implement Dynamics 365 Contact Center

    5.Supervisors report a growing queue backlog and several representatives who are present but never receive work. The administrator wants one place to investigate full-lifecycle diagnostic telemetry for routing assignment problems in Dynamics 365 Contact Center. Which capability fits?

    1. A.The Diagnose dashboard in Contact Center, which reads Application Insights data on how each conversation was routed and assigned, to find the cause of stalled work.
    2. B.Historical analytics reports in Power BI, which summarize queue volumes, wait times and abandonment by channel for past periods, to find trends in workload and service levels.
    3. C.The Quality Evaluation agent, which scores completed conversations against evaluation criteria, to find coaching needs and compliance gaps among representatives.
    4. D.The real-time analytics dashboard, which shows live queue depth and representative presence by channel, to monitor current workload and staffing across the contact center.
    Show answer & explanation

    Correct answer: A — The Diagnose dashboard in Contact Center, which reads Application Insights data on how each conversation was routed and assigned, to find the cause of stalled work.

    • A. The Diagnose dashboard in Dynamics 365 Contact Center draws on Application Insights data covering how conversations were routed and assigned. It is meant for problems such as a growing queue backlog or representatives who are present but receive no work.
    • B. Historical analytics reports in Power BI summarize past volumes, wait times and abandonment by queue and channel. They show trends, not the routing and assignment steps of individual conversations, so they cannot explain why present representatives get no work.
    • C. The Quality Evaluation agent scores completed conversations against evaluation criteria to support coaching and compliance. It looks at conversation quality after the fact and gives no insight into why routing left work unassigned.
    • D. The real-time analytics dashboard reports current queue depth and representative presence, which confirms the symptoms. It shows the present state and does not trace the routing and assignment of each conversation, so it cannot reveal the cause.

    1.2: Administer Dynamics 365 Contact Center

    6.A change to omnichannel configuration is risky, so the administrator wants a safe replica of production to validate it first. Which approach fits?

    1. A.Copy the production environment to a new sandbox in the Power Platform admin center, then apply the change in the copy
    2. B.Back up the production environment in the Power Platform admin center, then apply the change and restore if it fails
    3. C.Create a new sandbox in the Power Platform admin center, then install the omnichannel apps so queues and workstreams carry over
    4. D.Export the channel settings in the Copilot Service admin center, then import the file into the production environment
    Show answer & explanation

    Correct answer: A — Copy the production environment to a new sandbox in the Power Platform admin center, then apply the change in the copy

    • A. Correct: copying the environment to a sandbox carries over the existing omnichannel configuration, so the change can be tried in the copy while live conversations and representatives are untouched.
    • B. Incorrect: a backup only allows a rollback after the fact. The change would still run in the live environment, affecting representatives and customers before any problem shows, and a restore would also roll back other recent data.
    • C. Incorrect: a newly created environment starts empty. Installing the omnichannel apps does not bring over queues and workstreams, which are configuration data in production, so it is not a replica to test against.
    • D. Incorrect: importing the exported settings applies the change directly to the production environment, so the risky configuration goes live instead of being tested in a separate copy first.

    1.2: Administer Dynamics 365 Contact Center

    7.A new solution for the contact center was created using the default publisher. Later the team wants clean ownership and predictable names. What should have been done first?

    1. A.Create a custom publisher with its own prefix and build the solution under it, so new components are named with that prefix
    2. B.Keep the default publisher and change its prefix after the solution is built, so existing components pick up the new prefix
    3. C.Create a separate publisher per environment with its own prefix, so the managed solution imports under each target's prefix
    4. D.Set a prefix on each table in the Copilot Service admin center after deployment, so the tables carry the chosen prefix
    Show answer & explanation

    Correct answer: A — Create a custom publisher with its own prefix and build the solution under it, so new components are named with that prefix

    • A. Correct: the prefix belongs to the publisher and is written into the names of components created under it. Building the solution under a custom publisher from the start therefore fixes both owner and naming.
    • B. Incorrect: changing a publisher's prefix affects only components created afterwards. Components that already exist keep their original names, so the default publisher's naming and ownership stay as they were.
    • C. Incorrect: a solution keeps the same publisher in every environment it is imported into. Separate publishers per environment would make the same components appear to belong to different owners and would not give consistent prefixes.
    • D. Incorrect: a prefix is set on the publisher, not on individual tables, and the Copilot Service admin center has no per-table prefix setting. Tables created under the default publisher keep its prefix after deployment.

    1.3: Manage users

    8.An admin opens a capacity profile, goes to the Users tab, and cannot assign it to Priya, who holds the Basic User and Omnichannel agent roles. What is the most likely cause?

    1. A.Priya's user record has not been set up as a bookable resource, so a capacity profile cannot be assigned to her.
    2. B.Priya's user record is not linked to a queue in unified routing, so a capacity profile cannot be assigned to her.
    3. C.Priya's user record lacks the separate Omnichannel API access role, so a capacity profile cannot be assigned to her.
    4. D.Priya's user record has no default presence set in Omnichannel settings, so a capacity profile cannot be assigned to her.
    Show answer & explanation

    Correct answer: A — Priya's user record has not been set up as a bookable resource, so a capacity profile cannot be assigned to her.

    • A. A user must be set up as a bookable resource before a capacity profile can be assigned. Priya's roles are in place, so a missing bookable resource record is the most likely reason the Users tab will not take the assignment.
    • B. Queue membership determines which work reaches a user. It is not a prerequisite for assigning a capacity profile, so a user without a queue can still be given one and the assignment would not be blocked.
    • C. The Omnichannel API access role is intended for integration and application users, not for representatives. It plays no part in capacity profile assignment, and Priya's Omnichannel agent role already covers agent work.
    • D. Default presence controls the status a user starts with when signing in. Capacity profile assignment does not depend on it, so a missing default presence would not stop the admin from assigning the profile.

    2: Implement channels

    2.2: Provision and manage the voice channel

    9.A manager sets the Number label of an outbound profile to Billing and expects customers to see the name Billing on their handset. Why will this not happen?

    1. A.The label is shown only when the alternative caller ID is different from the profile number and has its own outbound profile.
    2. B.The label is used only in the representative's dialer, and caller name delivery (CNAM) is not supported by the voice channel.
    3. C.The label is passed to customers only for calls to numbers on the Allow list for countries/regions of the profile.
    4. D.The label is delivered as caller name only after the profile's Start setting is changed from Automatic to Manual.
    Show answer & explanation

    Correct answer: B — The label is used only in the representative's dialer, and caller name delivery (CNAM) is not supported by the voice channel.

    • A. Incorrect: choosing a different caller ID affects the displayed number, not a caller name, and requires its own outbound profile.
    • B. Correct: Number label identifies business context for the representative in the dialer; it is not a CNAM label customers can see.
    • C. Incorrect: the country allow list restricts where calls can be placed and has no effect on caller name display.
    • D. Incorrect: the Start setting controls when recording begins and is unrelated to caller identification.

    2.3: Configure channel features

    10.A WhatsApp outbound message template can be added to a Dynamics 365 workstream before WhatsApp has approved it in the Twilio account.

    1. A.True
    2. B.False
    Show answer & explanation

    Correct answer: B — False

    • A. True would be wrong: templates must be created in Twilio and approved by WhatsApp before they are added.
    • B. False is correct: approval comes first.

    2.1: Configure chat and digital channels

    11.A travel firm wants a fully branded chat interface that looks nothing like the standard widget, built in its own web framework. Which approach fits best?

    1. A.Use the omnichannel-chat-sdk package to start chats and exchange messages, with the firm's front end drawing the screens.
    2. B.Set the widget's script data attributes and style options to restyle it, with the firm's pages embedding the result.
    3. C.Enable the record-based channel to store conversations as Dataverse records, with a custom Power Apps form showing them.
    4. D.Create a custom messaging channel for the website, with Dynamics 365 supplying the chat window that the firm's pages embed.
    Show answer & explanation

    Correct answer: A — Use the omnichannel-chat-sdk package to start chats and exchange messages, with the firm's front end drawing the screens.

    • A. Correct. The Live Chat SDK is headless: it handles starting chats and sending and receiving messages, while the developer builds the entire interface in the firm's own framework.
    • B. Incorrect. Script data attributes and style options adjust things like colors and text, but the layout and structure of the standard widget stay in place, so it cannot look entirely different or be built natively in the firm's framework.
    • C. Incorrect. The record-based channel routes Dataverse records to representatives. It has no customer-facing chat interface, so a Power Apps form cannot serve as the chat experience for travelers.
    • D. Incorrect. A custom messaging channel connects an external messaging platform to Dynamics 365. It does not provide a chat window for the firm to embed or restyle, so it cannot deliver a fully custom interface.

    2.1: Configure chat and digital channels

    12.A developer is preparing a custom, non-Power Pages portal for authenticated chat. Which three deliverables are required before the admin can finish the setup?(Select 3)

    1. A.An RSA key pair and an endpoint that publishes the public key so the system can validate signed tokens.
    2. B.A token service that issues a JWT containing iss, iat, exp and sub claims and signs it with the private key.
    3. C.A client-side function that accepts a callback and returns the signed JWT to the widget within ten seconds.
    4. D.A client secret generated in Dataverse that the portal sends with each message to identify the customer.
    5. E.A Microsoft Entra app registration with a redirect URI that the widget opens in a popup for customer sign-in.
    Show answer & explanation

    Correct answers: A, B, C — An RSA key pair and an endpoint that publishes the public key so the system can validate signed tokens.; A token service that issues a JWT containing iss, iat, exp and sub claims and signs it with the private key.; A client-side function that accepts a callback and returns the signed JWT to the widget within ten seconds.

    • A. Correct. Tokens are signed with the private key and validated with the public key from the endpoint you register.
    • B. Correct. These claims are the minimum payload, and sub should carry the contact or account GUID for record linking.
    • C. Correct. The widget calls this function when a chat starts, so it must hand back the token promptly.
    • D. Incorrect. Authenticated chat on a custom portal relies on a private-key-signed JWT checked against a registered public key. Dataverse does not issue a client secret for the portal to attach to messages, so this deliverable is not part of the setup.
    • E. Incorrect. Sign-in occurs on the portal itself; the widget only receives the resulting JWT.

    2.2: Provision and manage the voice channel

    13.For consulting with and bridged transfer to an external payment contact, which THREE transcription and recording choices can be set in External Contact Settings?(Select 3)

    1. A.Disable audio recording, but leave transcription running on the external call
    2. B.Follow the workstream's recording and transcription settings on the external call
    3. C.Disable transcription, but leave audio recording running on the external call
    4. D.Disable audio recording and transcription together on the external call
    5. E.Disable recording on the representative's leg, but keep the external leg recorded
    Show answer & explanation

    Correct answers: A, B, D — Disable audio recording, but leave transcription running on the external call; Follow the workstream's recording and transcription settings on the external call; Disable audio recording and transcription together on the external call

    • A. Correct: External Contact Settings lets the audio recording be stopped while transcription continues, so a text record of the consult or bridged transfer remains.
    • B. Correct: External Contact Settings can leave the external call to follow the workstream, so the call uses the recording and transcription configuration already defined there.
    • C. Incorrect: External Contact Settings has no choice that keeps audio recording while dropping transcription. The mirror image of the supported audio-off, transcription-on choice is not offered.
    • D. Correct: External Contact Settings lets both audio recording and transcription be switched off for the external call, so nothing from that conversation is captured.
    • E. Incorrect: External Contact Settings works at the level of the whole external call. It cannot record one participant's leg and drop the other's, so this option does not exist.

    2.3: Configure channel features

    14.Two contact records in Dataverse share the same email address. A customer starts a chat, supplies that address, and automatic customer identification is enabled. What happens to the conversation's customer record?

    1. A.The conversation links to the first contact the search returns, and the second contact is flagged as a possible duplicate.
    2. B.The conversation is not linked to a customer record, and neither of the two contacts is merged or modified by identification.
    3. C.The conversation links to both contacts, and the agent selects the right one in the customer summary before replying.
    4. D.The conversation links to the contact with the earliest created date, and the newer record is left out of the match.
    Show answer & explanation

    Correct answer: B — The conversation is not linked to a customer record, and neither of the two contacts is merged or modified by identification.

    • A. Incorrect: when the lookup finds two contacts, it does not choose the first result, and it does not flag the other record as a duplicate. Duplicate detection is a separate Dataverse feature.
    • B. Correct: a shared email address matches two contacts, and identification links a record only when the search finds a single match. The conversation therefore has no linked customer, and neither contact is merged or modified.
    • C. Incorrect: a conversation links to one customer record at most. Two matches produce no link, so the agent has nothing to choose between in the customer summary.
    • D. Incorrect: identification has no created-date ordering and does not rank matching contacts. With two matches it links neither.

    3: Configure agents and AI capabilities

    3.1: Configure agent assist capabilities in Dynamics 365 Contact Center

    15.When Copilot answers from the organization's Dynamics 365 knowledge base, it uses the content attribute of the knowledge article table, and this behavior cannot be customized.

    1. A.True
    2. B.False
    Show answer & explanation

    Correct answer: A — True

    • A. Correct: Copilot uses only the content attribute of the knowledge article table to generate responses for Ask a question, Write an email and Draft a response.
    • B. Incorrect: administrators cannot point Copilot at other article columns; the content attribute is fixed.

    3.1: Configure agent assist capabilities in Dynamics 365 Contact Center

    16.Contoso enables case summaries in Copilot Service admin center. Representatives report that newly logged cases with only a three-word title and an empty description show no Copilot summary, while longer cases summarize correctly. What is the cause?

    1. A.Case summaries require roughly 50 tokens (about 38 English words) of source text across the case fields, and shorter cases are skipped
    2. B.Case summaries require at least one outbound email activity logged on the case by a representative, and cases without one are skipped
    3. C.Case summaries require the case to be routed into a service queue by unified routing rules, and cases not yet routed are skipped
    4. D.Case summaries require the prvIntelligenceUsage privilege at global scope in the representative's role, and their cases are skipped without it
    Show answer & explanation

    Correct answer: A — Case summaries require roughly 50 tokens (about 38 English words) of source text across the case fields, and shorter cases are skipped

    • A. Case summaries need a minimum of about 50 tokens (roughly 38 English words) across the fields Copilot reads. A case with only a short title and no description falls below that minimum, so no summary is produced, while longer cases pass it.
    • B. No outbound email is required. Copilot summarizes from case fields, email activity records, notes and conversation summaries, so what separates the cases that summarize from those that do not is how much content they hold, not whether a representative has emailed.
    • C. Queue routing is not a condition for case summaries. Copilot builds them from the content it reads on the case, whether or not unified routing has placed the case in a queue, so the amount of content is what decides the outcome.
    • D. The prvIntelligenceUsage privilege governs Copilot access in custom roles, but a missing privilege would block summaries on all of a representative's cases. These same representatives get summaries on longer cases, so access is not what leaves the sparse cases blank.

    3.1: Configure agent assist capabilities in Dynamics 365 Contact Center

    17.Fabrikam sells two product lines and wants Ask a question to answer only from articles whose Product field equals Hub Pro. Representatives must not see or change this restriction. Which configuration fits?

    1. A.Add a representative filter for Product = Hub Pro, assigned to Ask a question with Filter status turned on
    2. B.Add an automated filter for Product = Hub Pro, assigned to Ask a question, letting representatives view or change it
    3. C.Add a preset filter for Product = Hub Pro, created under Manage rules and assigned to Ask a question
    4. D.Add a prompt in the Prompts tab, with Instructions for Copilot to answer only from Hub Pro articles
    Show answer & explanation

    Correct answer: C — Add a preset filter for Product = Hub Pro, created under Manage rules and assigned to Ask a question

    • A. Representative filters appear in the help pane, where representatives can select or clear them. Turning on Filter status only preselects the value, so representatives can still see and change the restriction.
    • B. Allowing representatives to view or change the filter exposes it to them. Fabrikam needs a restriction representatives can neither see nor edit, so this setup does not meet that requirement.
    • C. A preset filter created under Manage rules is applied in the background to the knowledge articles Ask a question draws from. A rule on the Product field limits answers to Hub Pro without being shown to representatives.
    • D. Instructions for Copilot in a prompt shape how that prompt words its output. They do not limit which knowledge articles are retrieved, so answers could still draw on the other product line.

    3.2: Configure voice agents

    18.An external SBC sends the header X-CallID with every call into a voice agent, and the maker needs its value in several topics. Which configuration reads it correctly?

    1. A.Parse value node on Conversation.SipXHeader, schema key X-CallID, output saved to a Global variable
    2. B.Parse value node on Conversation.SipXHeader, schema key x-CallID, output saved to a Global variable
    3. C.Parse value node on System.Conversation.SipUuiHeaderValue, schema key x-CallID, output saved to a Topic variable
    4. D.Set variable node on System.Activity.From.Name, with the value copied unchanged into a Global variable
    Show answer & explanation

    Correct answer: B — Parse value node on Conversation.SipXHeader, schema key x-CallID, output saved to a Global variable

    • A. The source variable and scope are fine, but incoming header names are normalized to a lowercase x- prefix. A schema key of X-CallID therefore does not match, and the parsed value comes back empty.
    • B. Incoming X-headers arrive in Conversation.SipXHeader with a lowercase x- prefix, so the schema key must be x-CallID. A Global variable keeps the parsed value available to the other topics that need it.
    • C. SipUuiHeaderValue holds the User-to-User Information (UUI) header, not X-headers, so the CallID value is not found there. A Topic variable would also be invisible to the other topics that need the value.
    • D. System.Activity.From.Name holds the caller's name or ID, not SIP header data. X-header values are exposed through Conversation.SipXHeader, so copying From.Name never yields the CallID.

    3.2: Configure voice agents

    19.On a Question node that collects an account number, silent callers should be handed to a human representative after one repeat of the question. Which node-level configuration does this?

    1. A.Set reprompts on silence to Repeat once and set the Fallback action to Escalate for the node
    2. B.Set reprompts on silence to Repeat once and keep the Fallback action on its default Hang up behavior
    3. C.Set reprompts on silence to Don't repeat and set the Fallback action to Escalate for the node
    4. D.Set reprompts on silence to Don't repeat and keep the Fallback action on its default Hang up behavior
    Show answer & explanation

    Correct answer: A — Set reprompts on silence to Repeat once and set the Fallback action to Escalate for the node

    • A. Repeat once re-asks for the account number a single time when the caller is silent, and the Escalate fallback then sends the call to the Escalate system topic for human handoff.
    • B. The single repeat is configured correctly, but the default Hang up behavior ends the call right after it, so silent callers are disconnected instead of reaching a representative.
    • C. Escalate does hand callers off to a representative, but Don't repeat skips the re-ask, so the handoff happens at the first silence instead of after one repeat.
    • D. Don't repeat skips the re-ask, and the default Hang up behavior then ends the call, so silent callers are neither asked again nor handed to a representative.

    4: Configure work distribution

    4.1: Configure queues

    20.A conversation that a prequeue overflow action transfers to a different queue is evaluated for prequeue overflow again in the destination queue before it is queued there.

    1. A.True
    2. B.False
    Show answer & explanation

    Correct answer: B — False

    • A. Incorrect. The prequeue check runs only once per work item, so a transferred item is placed without further prequeue overflow checks.
    • B. Correct. Prequeue overflow is checked once only for each work item; after a transfer, the item is assigned to the destination queue without another check.

    4.1: Configure queues

    21.A conversation matches route-to-queue rules for three queues. Queue 1 is overflowing, while queue 2 and queue 3 are not overflowing. Which prequeue behavior applies?

    1. A.The conversation goes to queue 1, the first queue in rule order, and queue 1's overflow action runs on the work item.
    2. B.The conversation alternates between queues 2 and 3 in round robin, and queue 1's overflow action does not run on the work item.
    3. C.The conversation goes to queue 2, the first queue in rule order within its overflow limits, and queue 1's overflow action is not triggered.
    4. D.The conversation goes to the queue with the shortest estimated wait time of the three, and queue 1's overflow action is skipped.
    Show answer & explanation

    Correct answer: C — The conversation goes to queue 2, the first queue in rule order within its overflow limits, and queue 1's overflow action is not triggered.

    • A. Incorrect. Position in rule order does not decide the outcome on its own. A matched queue's overflow action runs only when no matched queue can take the work, and queues 2 and 3 are still available, so queue 1 is passed over.
    • B. Incorrect. Prequeue evaluation does not rotate work between matched queues. It picks one queue by walking the matches in order. Round robin is an assignment method for distributing work to agents within a single queue.
    • C. Correct. With several matched queues, prequeue evaluation checks them in rule order and routes to the first one that is within its overflow limits. That is queue 2, so no overflow action fires.
    • D. Incorrect. Prequeue evaluation does not rank matched queues by estimated wait time. It checks them in rule order and selects the first one that is not overflowing, which here is queue 2 and not necessarily the shortest-wait queue.

    4.2: Configure basic and unified routing

    22.A team wants a Copilot Studio agent to greet customers before a human takes over. Which workstream design delivers conversations to the agent first at runtime?

    1. A.Add the agent to a record workstream's routing rules, so it triages each new case before the case is assigned to a queue
    2. B.Add the agent to a pick-mode messaging workstream, so it takes conversations from the Open work items list as they arrive
    3. C.Add the agent to the fallback queue of a push-based messaging workstream, so it receives conversations that no routing rule has matched
    4. D.Add the agent to the Bot area of a push-based messaging workstream, so it receives each conversation ahead of representatives
    Show answer & explanation

    Correct answer: D — Add the agent to the Bot area of a push-based messaging workstream, so it receives each conversation ahead of representatives

    • A. Record workstreams route records such as cases, and agents are not recommended there. Greeting customers means handling a live conversation, which a record workstream does not deliver.
    • B. Pick mode leaves work items for representatives to select, and the agent cannot take them from the Open work items list. Agents receive conversations only through push-based workstreams, so nothing reaches the agent at runtime.
    • C. Agents are associated with workstreams, not with queues. The fallback queue only receives work when no route-to-queue rule matches, so conversations that match a rule would not reach the agent.
    • D. Correct: adding the agent in the Bot area of a push-based messaging workstream sends each work item to the agent once classification has run. A representative picks up the conversation only afterwards.

    4.2: Configure basic and unified routing

    23.A queue uses a custom assignment method that orders reps by Capacity. The workstream default skill matching algorithm is Exact Match and skills are attached to conversations, yet reps without those skills get the work. Why?

    1. A.Exact Match is a voice-channel setting, so skills attached to conversations on other channels are ignored during assignment
    2. B.The workstream's default skill matching algorithm applies only to out-of-the-box assignment, so custom rules need User skills conditions
    3. C.Skills are attached to conversations after reps are selected in unified routing, so they cannot affect who receives the work
    4. D.Exact Match is bypassed for reps whose presence is not among the workstream's allowed presences, so skills are not checked for them
    Show answer & explanation

    Correct answer: B — The workstream's default skill matching algorithm applies only to out-of-the-box assignment, so custom rules need User skills conditions

    • A. Skill matching is not restricted to the voice channel. Skills attached to conversations are considered on other channels too, so the missing matches come from the queue's custom assignment method.
    • B. Correct: the workstream's default skill matching algorithm is supported only with out-of-the-box assignment. A custom assignment method ordering by Capacity must define its own User skills conditions to compare conversation skills with rep skills.
    • C. Skills are attached during classification, before the conversation is routed to the queue and assignment runs. They are therefore available to assignment rules, which can use them to choose the rep.
    • D. Presence is a separate eligibility check. Reps outside the allowed presences are not offered work, and skill matching is not bypassed for them. The unmatched assignments come from the custom assignment method.

    4.2: Configure basic and unified routing

    24.Contoso is enabling preferred representative routing for push-based case and chat work. Which three conditions must hold for the feature to route work to a contact's preferred representatives?(Select 3)

    1. A.Each preferred representative is a member of the queue that the routing rules send the work items to
    2. B.The work item's customer resolves to a contact record, such as a signed-in chat user or a case Customer field
    3. C.The work arrives through a workstream whose work distribution mode is set to push rather than pick
    4. D.Each contact record has a capacity profile assigned that covers the channel of the incoming work item
    5. E.Each preferred representative holds the skills that the work item's classification ruleset assigns to it
    6. F.The workstream's default skill matching algorithm is set to Exact Match rather than Closest Match
    Show answer & explanation

    Correct answers: A, B, C — Each preferred representative is a member of the queue that the routing rules send the work items to; The work item's customer resolves to a contact record, such as a signed-in chat user or a case Customer field; The work arrives through a workstream whose work distribution mode is set to push rather than pick

    • A. Correct: a representative mapped to a contact can only be assigned if they belong to the queue that receives the work, so queue membership is a condition.
    • B. Correct: the preferred matrix maps representatives to contacts, so the work item's customer must resolve to a contact record, for example a signed-in chat user or the Customer field on a case.
    • C. Correct: preferred representative routing applies only to push-based workstreams; work distributed in pick mode is not covered by the feature.
    • D. Capacity profiles are assigned to users (representatives), not to contact records, and a contact-level capacity profile is not a condition for preferred routing.
    • E. Preferred routing selects representatives from the contact-to-representative matrix, not by skill, so representatives do not need the skills a classification ruleset assigns to the work item.
    • F. The skill matching algorithm only governs skill-based assignment. It has no effect on whether the preferred matrix is evaluated, so Exact Match versus Closest Match is irrelevant here.

    5: Configure the Dynamics 365 Contact Center representative experience

    5.1: Configure experience profiles

    25.Inbox views refresh automatically every five minutes, and representatives can also refresh a view manually by selecting the Refresh icon.

    1. A.True
    2. B.False
    Show answer & explanation

    Correct answer: A — True

    • A. True: the documented behavior is an automatic refresh every five minutes with a manual Refresh icon available.
    • B. False would be incorrect, because automatic refresh does exist and manual refresh is an additional option.

    5.2: Configure productivity tools

    26.A macro opens a new task from a case form that the representative keeps in the anchor tab. The task subject must contain the case number of that anchor record. Which value belongs in Attribute Value?

    1. A.Follow up on `{caseTitle}`
    2. B.Follow up on `${$oc.ticketnumber}`
    3. C.Follow up on `${anchor.ticketnumber}`
    4. D.Follow up on `${$session.ticketnumber}`
    Show answer & explanation

    Correct answer: C — Follow up on `${anchor.ticketnumber}`

    • A. Incorrect. `{caseTitle}` is the template-style slug and returns the title of a linked case, not its ticket number.
    • B. Incorrect. The `${$oc.<slug>}` format targets the omnichannel connector context, such as customer name, rather than record attributes.
    • C. Correct. The `${anchor.<attribute_name>}` slug reads an attribute of the record loaded in the anchor tab, such as the case ticket number.
    • D. Incorrect. The `${$session.<slug>}` format exposes session values such as visitor device, not arbitrary attributes of the anchor record.

    5.1: Configure experience profiles

    27.An administrator is working on a custom experience profile page for a team of voice and chat representatives. Which of the following can be configured directly on that profile page? (Select all that apply.)(Select 3)

    1. A.Add an entity session template that applies to the profile's conversation sessions
    2. B.Switch on the productivity pane and pick tools such as knowledge search and scripts
    3. C.Enable the inbox view for the profile through the Edit option in its Inbox section
    4. D.Define overflow and fallback conditions for the profile's unassigned conversations
    5. E.Create the slug values that populate notification field headers for the profile
    6. F.Set the capacity profile that caps concurrent conversations per representative
    Show answer & explanation

    Correct answers: A, B, C — Add an entity session template that applies to the profile's conversation sessions; Switch on the productivity pane and pick tools such as knowledge search and scripts; Enable the inbox view for the profile through the Edit option in its Inbox section

    • A. Correct: the experience profile page offers Add entity session template, which links a session template to the profile.
    • B. Correct: the Productivity pane section turns the pane on and lets the administrator enable tools such as knowledge search and agent scripts.
    • C. Correct: the Inbox section of the profile page has an Edit option that enables the inbox view for that profile.
    • D. Incorrect: overflow and fallback conditions are queue settings in unified routing, so they are configured on the queue and not on an experience profile.
    • E. Incorrect: slugs are entered as values on notification fields inside notification templates, so an experience profile page is not where they are created.
    • F. Incorrect: capacity profiles are user-level capacity settings that are assigned to users, and the experience profile page does not configure them.

    5.2: Configure productivity tools

    28.A macro must call a non-Microsoft web service and then open a task form populated with the response. Which macro action pattern supports the API call?

    1. A.Add Open an existing record, with the Entity logical name field set to the web service base URL
    2. B.Add Search the knowledge base, with the Search string field set to the web service endpoint address
    3. C.Add Autofill form fields, with the Attribute Value of a task field set to the web service request URL
    4. D.Add Execute JavaScript, with the Web resource name and Function name set to a script calling the web service
    Show answer & explanation

    Correct answer: D — Add Execute JavaScript, with the Web resource name and Function name set to a script calling the web service

    • A. Incorrect. Open an existing record expects a Dataverse table logical name and a record ID. A URL is not a table name, so nothing is sent to the non-Microsoft web service and no task form is populated from a response.
    • B. Incorrect. Search the knowledge base looks up the entered text in Dataverse knowledge articles. An endpoint address in the search string is only search text, so the external service is never contacted.
    • C. Incorrect. Autofill form fields only places values into fields on the form in focus. A request URL stored in a task field is plain data, and no call is made to the external service.
    • D. Correct. Execute JavaScript runs a named function from a Dataverse web resource. That function can send the request to the external service, which lets the macro integrate with non-Microsoft applications.

    5.3: Create and administer knowledge management

    29.Representatives working on a custom Work Order table see no knowledge search pane in the app side pane, although Case and Conversation records show it. What should the admin do in the Copilot Service admin center?

    1. A.Edit the app site map and add a URL subarea that opens the Knowledge Settings page for the Work Order table
    2. B.Add a SharePoint external search provider for the Work Order table and show its results in the side pane
    3. C.Add the Work Order table on the Record Types page in Knowledge settings and set up its side pane search control
    4. D.Turn on Enable Kb preview mode so knowledge articles appear in the side pane for the Work Order table
    Show answer & explanation

    Correct answer: C — Add the Work Order table on the Record Types page in Knowledge settings and set up its side pane search control

    • A. A site map URL subarea only makes the Knowledge Settings page reachable in a custom model-driven app. Work Order still has to be registered as a record type, so the search control stays missing.
    • B. A search provider federates searches to an outside source such as SharePoint. It does not register the Work Order table for knowledge search, so the side pane control still does not appear for it.
    • C. Correct. Knowledge search in the side pane is set up by default only for Case and Conversation. Other tables are added on the Record Types page in Knowledge settings, where the side pane search control is configured.
    • D. Kb preview mode only changes how an article opens when it is reached from global search. It does not add tables to knowledge search, so Work Order still has no search control in the side pane.

    5.3: Create and administer knowledge management

    30.The admin does not want the agent to auto-publish and instead wants representatives to review agent-drafted articles from resolved cases. Which THREE items must be in place for the review experience?(Select 3)

    1. A.Enable auto-publish for internal target audiences, with representatives editing the articles once released
    2. B.Enable in-app notifications for representatives, alerting them to cases the agent is considering for article publishing
    3. C.Grant representatives edit permission on knowledge articles, letting them revise and publish the agent's drafts
    4. D.Share the Copilot Studio agent with representatives as editors, letting them open its drafts in the authoring canvas
    5. E.Enable Timeline and Timeline highlights on the case form, letting representatives see and open articles awaiting review
    Show answer & explanation

    Correct answers: B, C, E — Enable in-app notifications for representatives, alerting them to cases the agent is considering for article publishing; Grant representatives edit permission on knowledge articles, letting them revise and publish the agent's drafts; Enable Timeline and Timeline highlights on the case form, letting representatives see and open articles awaiting review

    • A. Auto-publish releases articles without a human check, which is what the admin wants to avoid. Representatives would only edit articles after they were already live, so no review step happens before publication.
    • B. Correct. In-app notifications tell representatives which of their cases the agent is considering for publishing, so they know there are drafts waiting for their review.
    • C. Correct. Representatives need permission to edit knowledge articles so they can revise the agent's drafts and publish them once they are satisfied.
    • D. Representatives review drafts from the resolved case in Copilot Service workspace. Editor access to the Copilot Studio agent only lets them change the agent itself, and the drafts are not opened there.
    • E. Correct. The case form must have Timeline and Timeline highlights enabled so representatives can see the articles awaiting review and open them from the case.

    6: Manage analytics for the Dynamics 365 Contact Center

    6.1: Configure the Dynamics 365 Contact Center supervisor experience

    31.Which TWO statements about monitoring conversations as a supervisor in Dynamics 365 Contact Center are accurate?(Select 2)

    1. A.Supervisors must be members of the queue handling the conversation, otherwise the Monitor action is hidden from them.
    2. B.A supervisor cannot monitor a conversation that is currently assigned to that same supervisor as an agent.
    3. C.Monitoring is available only for chat conversations, and voice calls are restricted to the transfer and end actions.
    4. D.A voice conversation can be monitored only while it is in the Active state, not before or after the active call.
    5. E.Monitoring any conversation requires the supervisor to hold a Microsoft Teams Premium licence on their user account.
    Show answer & explanation

    Correct answers: D, B — A voice conversation can be monitored only while it is in the Active state, not before or after the active call.; A supervisor cannot monitor a conversation that is currently assigned to that same supervisor as an agent.

    • A. Incorrect. Queue membership is not the gating condition. The Supervisor Monitor setting and conversation state are what matter.
    • B. Correct. Supervisors are not able to monitor conversations that are assigned to them.
    • C. Incorrect. Voice conversations can be monitored when active, so monitoring is not limited to chat.
    • D. Correct. For voice, only conversations in the Active state can be monitored.
    • E. Incorrect. Teams Premium licences govern Teams' own call monitoring features. Contact Center monitoring does not depend on one.

    6.1: Configure the Dynamics 365 Contact Center supervisor experience

    32.A user holding only the Quality Evaluator role can create evaluation criteria and evaluation plans for the Quality Evaluation agent.

    1. A.True
    2. B.False
    Show answer & explanation

    Correct answer: B — False

    • A. True is wrong here: Quality Evaluator privileges are limited to completing or assigning evaluations.
    • B. False is correct. Creating criteria and plans requires a role such as Quality Manager, while Quality Evaluator can only complete or assign evaluations.

    6.2: Customize analytics and reporting

    33.An analyst must add a new calculated measure and a custom column to the historical analytics data model so a report can show handle time by a custom attribute. Which approach matches the supported path?

    1. A.Open the packaged report in the embedded Power BI editor and define the measure and column on its semantic model, then save it back to the shared workspace.
    2. B.Turn on data model customization in the admin center, select a Fabric workspace, and provision the data models and report copies for editing there.
    3. C.Add a Dataverse calculated column for the custom attribute on the conversation table, then refresh the packaged historical model so it reads the new column.
    4. D.Extend the Application Insights workbook query to return the attribute and a handle-time calculation, then point the historical report at the query output.
    Show answer & explanation

    Correct answer: B — Turn on data model customization in the admin center, select a Fabric workspace, and provision the data models and report copies for editing there.

    • A. Incorrect: the embedded editor only changes the report's visuals. The packaged semantic model is read-only there, so new measures and columns cannot be defined on it, whatever workspace the report is saved to.
    • B. Correct: an admin enables data model customization, chooses a Fabric workspace, and provisions editable copies of the data models and reports. Measures and columns are then added in those copies.
    • C. Incorrect: the packaged historical model has a fixed schema, so a new Dataverse column is not added to it on refresh. Extending the model requires the provisioned, customizable copy.
    • D. Incorrect: Application Insights workbook queries work on diagnostic telemetry and are separate from the historical analytics model, so a changed query cannot supply the model or its report with new fields.

    6.2: Customize analytics and reporting

    34.A customer complains that a chat waited 40 minutes and was never assigned. The administrator wants to trace the routing and assignment events of that single conversation. Where should they investigate?

    1. A.Open the Omnichannel historical analytics dashboard in Customer Service and review the conversation reports, narrowed to that chat's date and queue.
    2. B.Open the workstream's routing rules and assignment method in the admin center, and review the configuration that applies to that chat's queue.
    3. C.Open the connected Application Insights resource, run the sample conversation diagnostics Kusto queries in Logs, and filter by that conversation's ID.
    4. D.Open the Omnichannel real-time analytics dashboard in Customer Service and review the queue and agent views, narrowed to the 40-minute wait window.
    Show answer & explanation

    Correct answer: C — Open the connected Application Insights resource, run the sample conversation diagnostics Kusto queries in Logs, and filter by that conversation's ID.

    • A. Incorrect: the historical analytics dashboard summarizes conversation metrics by period, queue and agent. It does not list the individual routing and assignment events of one conversation, so it cannot explain why that chat was never assigned.
    • B. Incorrect: workstream routing rules and the assignment method are configuration. They show how work is meant to be routed, not what actually happened to this chat, so they give no event trail for it.
    • C. Correct: diagnostics data for Omnichannel conversations is sent to the connected Application Insights resource. The sample Kusto queries in Logs, filtered by conversation ID, return the routing and assignment events of that one conversation.
    • D. Incorrect: the real-time analytics dashboard shows the current state of queues and agents as aggregates. It does not keep a per-event routing history of one conversation, so the 40-minute wait cannot be traced there.

    6.2: Customize analytics and reporting

    35.An administrator on a trial environment cannot get the conversation diagnostics connection to Application Insights to configure, although the Application Insights resource exists and the administrator has Azure access. Which environment prerequisite should they verify first?

    1. A.Confirm the environment is in the same Azure region as the Power BI tenant, as the diagnostics export depends on that match.
    2. B.Confirm the environment has Customer Insights enabled in the tenant, as the diagnostics export depends on that service.
    3. C.Confirm the environment has a Microsoft Fabric workspace linked to it, as the diagnostics export depends on that link.
    4. D.Confirm the environment is enabled as a managed environment, as the diagnostics export depends on that capability.
    Show answer & explanation

    Correct answer: D — Confirm the environment is enabled as a managed environment, as the diagnostics export depends on that capability.

    • A. Incorrect: the diagnostics export to Application Insights is not tied to the Power BI tenant's region, so a regional mismatch with Power BI would not block the connection from being configured.
    • B. Incorrect: Customer Insights is a separate product, and conversation diagnostics events do not come from it, so enabling it has no bearing on the Application Insights connection.
    • C. Incorrect: a linked Fabric workspace serves analytics and data scenarios and is not part of the Application Insights diagnostics export, so its absence does not explain the blocked connection.
    • D. Correct: the Application Insights export for conversation diagnostics is documented as requiring a managed environment. A trial environment that is not managed would block the connection even with a valid resource and Azure access.

    Want the full experience?

    These are just samples. Practice the full Microsoft Dynamics 365 Contact Center AI Engineer (AB-250) - December 18 onwards question bank in quiz mode — free, no signup, with domain practice and exam simulation.